Appliance Repair Service Blog

Miele Dryer F2 Error

Miele Dryer Error F2 indicates the problem with heater bank temperature sensor.

  • Symptom: "Rotary Iron" LED flashes. Program stops, buzzer starts intermittently for 2 minutes and only "Air Dry" is working.
  • Possible causes: 
  1. Open circuit in heater bank temperature sensor (2R30)
  2. Heater bank (R1, R2) is not heating.
  3. Faulty the Heater Relay.
  4. Temperature Limiter (F2)
  • Solution
  1. Check the heater bank temperature sensor (2R30) for an open circuit.
  2. Check the heater bank (R1, R2) for a short or an open circuit.
  3. Check the heater relay (1K1/1 – 2K1/1).
  4. Check temperature limiter F2 for continuity.
Miele Appliance Repair San Diego (619)339-5682  |  (858)208-3549   |   (949)432-0720
MD Appliance LLC offers  Miele dryer Repair San Diego CA. We service and repair Miele appliances such as washers, dishwashers, dryers, refrigerators, microwaves, cooktops and ovens. We train hard to ensure that you and your Miele appliances receive the service that you deserve. As a specialists in Miele dryer repair our technician will make sure to explain the problem before servicing your appliance. We use only genuine Miele parts for your appliances and have many of them on hand in our service vehicles. We appreciate your business and we are looking forward to work on your Miele Appliance.

Disclaimer: The Technical Reference Materials (hereinafter “Materials”) at this site are intended for viewing and use by qualified appliance service technicians. If you do not possess sufficient mechanical and electrical skills and the ability to comprehend, understand and follow all safety warnings and cautions on the product in these Materials, do not attempt to undertake the repairs that are depicted in these Materials. MD Appliance LLC disclaims any and all liability, to the fullest extent permitted by law, arising out of your use of the site and Materials.

Miele Dryer F66 Error

Miele Dryer Error F66 is the error that indicates problem with air flow.

  • Symptom: This fault occurs in the normal operating mode, "Clean Air Paths" lights up, and dryer stops operating and buzzes intermittently for 2 minutes.
  • Possible causes: Dryer vent is clogged or kinked causing insufficient air flow .
  • Solution
  1. Check and clean dryer vent and all air paths.
  2. Clean the lint filter. 
  3. Clean the heat exchanger and the vent grille (Condenser dryer only).
Miele Appliance Repair San Diego (619)339-5682  |  (858)208-3549   |   (949)432-0720
MD Appliance LLC offers  Miele dryer Repair San Diego CA. We service and repair Miele appliances such as washers, dishwashers, dryers, refrigerators, microwaves, cooktops and ovens. We train hard to ensure that you and your Miele appliances receive the service that you deserve. As a specialists in Miele dryer repair our technician will make sure to explain the problem before servicing your appliance. We use only genuine Miele parts for your appliances and have many of them on hand in our service vehicles. We appreciate your business and we are looking forward to work on your Miele Appliance.

Disclaimer: The Technical Reference Materials (hereinafter “Materials”) at this site are intended for viewing and use by qualified appliance service technicians. If you do not possess sufficient mechanical and electrical skills and the ability to comprehend, understand and follow all safety warnings and cautions on the product in these Materials, do not attempt to undertake the repairs that are depicted in these Materials. MD Appliance LLC disclaims any and all liability, to the fullest extent permitted by law, arising out of your use of the site and Materials.

Washer is Not Spinning

Washer machine is not going through the spin cycle, leaving laundry soaking wet.  

  • Symptom: If your laundry is soaking wet at the end of the wash cycle that is the sing that your washer did not spin. There are so many different problems that can cause your washer not to spin. I'm just going to list a few of them.
  • Possible causes:
  1. Defective door latch.
  2. Washer is not draining.
  3. Mechanical problem such as clutch, rotor, stator, belt, transmission etc.
  4. Problems with electronics.
  5. Unbalanced load.
Solution:
  1. First check the washer drain cycle. If your washer is not draining it will not spin as well. Check your drain pump, hoses etc.
  2. Faulty door latch or lid lock/switch will prevent washer to spin. trouble shoot door clock or switch and replace if necessary.
  3. Troubleshoot control electronics for proper operation.
If problem persist you'll need to call professional servicer provider for help.
Washer Repair San Diego (619)339-5682  |  (858)208-3549   |   (949)432-0720
MD Appliance LLC offers  Washer Repair San Diego CA. We service and repair  appliances such as washers, dishwashers, dryers, refrigerators, microwaves, cooktops and ovens. We train hard to ensure that you and your appliances receive the service that you deserve. As a specialists in washer repair our technician will make sure to explain the problem before servicing your washer. We use only genuine appliance parts for your washer repair and have many of them on hand in our service vehicles. We appreciate your business and we are looking forward to work on your Washer.

Disclaimer: The Technical Reference Materials (hereinafter “Materials”) at this site are intended for viewing and use by qualified appliance service technicians. If you do not possess sufficient mechanical and electrical skills and the ability to comprehend, understand and follow all safety warnings and cautions on the product in these Materials, do not attempt to undertake the repairs that are depicted in these Materials. MD Appliance LLC disclaims any and all liability, to the fullest extent permitted by law, arising out of your use of the site and materials.

Washer is Making Noise

Washer machine is making noise when spinning, draining or washing. 

  • Symptom: Grinding or squeaking noise when washer is operating through the cycle.
  • Possible causes:
  1. Damaged tub bearing.
  2. Misaligned inner basket due to damaged tub bearing.
  3. Broken shock absorbers or outer tub springs
  4. Debris in the drain pump.
  5. Unbalanced load due to washer not being leveled.
Solution:
  1. The tub bearing is mounted in the middle of the outer tub. The washer is noisy when spinning or it is leaking from the tub due to damaged bearing or tub seal. Replacing the tub bearing and seal is a very complicated repair and will require disassembling most of the washer.
  2. If the washer inner basket is loose and it's making kind of clanking noise when spinning there is the problem with the tub bearing.
  3. Check washer shock absorbers, outer tub springs, suspensions or even counterbalance blocks. If damaged, replace them.
  4. Check drain pump for foreign object or debris.
  5. Make sure that your washer is leveled.
If problem persist you'll need to call professional servicer provider for help.
Washer Repair San Diego (619)339-5682  |  (858)208-3549   |   (949)432-0720
MD Appliance LLC offers  Washer Repair San Diego CA. We service and repair  appliances such as washers, dishwashers, dryers, refrigerators, microwaves, cooktops and ovens. We train hard to ensure that you and your appliances receive the service that you deserve. As a specialists in washer repair our technician will make sure to explain the problem before servicing your washer. We use only genuine appliance parts for your washer repair and have many of them on hand in our service vehicles. We appreciate your business and we are looking forward to work on your Washer.

Disclaimer: The Technical Reference Materials (hereinafter “Materials”) at this site are intended for viewing and use by qualified appliance service technicians. If you do not possess sufficient mechanical and electrical skills and the ability to comprehend, understand and follow all safety warnings and cautions on the product in these Materials, do not attempt to undertake the repairs that are depicted in these Materials. MD Appliance LLC disclaims any and all liability, to the fullest extent permitted by law, arising out of your use of the site and materials.

Washer Machine Won’t Drain

Washer machine won't drain water. Washer is not draining or it's slowly draining causing cycle interruption.  

  • Symptom: Washer is not draining all the water from the washer tub. Cycle is interrupted and washer will not advance into next part of the cycle. Washer will not spin or unlock the door due to water presence in the washer tub.
  • Possible causes:
  1. Clogged or kinked drain hose.
  2. Clogged drain pump filter.
  3. Broken drain pump impeller
  4. Clogged drain pipe (plumbing issue)
  5. Faulty door switch.
  6. Faulty electronics.

Solution:

  1. Check the drain hose for clogs or kinks.
  2. Clean the drain pump filter.
  3. Check the drain pump impeller
  4. Check for AC or DC power to the drain pump. If power present replaced the pump.
If problem persist you'll need to call professional servicer provider for help.

Washer Repair San Diego (619)339-5682  |  (858)208-3549   |   (949)432-0720


MD Appliance LLC offers  Washer Repair San Diego CA. We service and repair  appliances such as washers, dishwashers, dryers, refrigerators, microwaves, cooktops and ovens. We train hard to ensure that you and your appliances receive the service that you deserve. As a specialists in washer repair our technician will make sure to explain the problem before servicing your washer. We use only genuine appliance parts for your washer repair and have many of them on hand in our service vehicles. We appreciate your business and we are looking forward to work on your Washer.

Disclaimer: The Technical Reference Materials (hereinafter “Materials”) at this site are intended for viewing and use by qualified appliance service technicians. If you do not possess sufficient mechanical and electrical skills and the ability to comprehend, understand and follow all safety warnings and cautions on the product in these Materials, do not attempt to undertake the repairs that are depicted in these Materials. MD Appliance LLC disclaims any and all liability, to the fullest extent permitted by law, arising out of your use of the site and materials.

Washer Machine is Leaking Water

Washer machine is leaking water. Water leaks could be obvious, such as visible puddle on the floor. More damaging are not so visible, long lasting small water leaks. Unfortunately, the first thing we notice is floor damage and then we suspect water leak.

  • Symptom: Visible water puddle on the floor or visible water leak. Floor or cabinet water damage due to washer water leak.
  • Possible causes:
  1. Leaking drain pump.
  2. Leaking drain hose.
  3. Leaking water inlet valve or hose
  4. Damage tub seals or door boot gaskets
  5. Plugged drain pipe (plumbing issue).
Solution:
  1. Determine source of the water leak.
  2. Replace the part that causing the water leak.
If problem persist you'll need to call professional servicer provider for help.
Washer Repair San Diego (619)339-5682  |  (858)208-3549   |   (949)432-0720
MD Appliance LLC offers  Washer Repair San Diego CA. We service and repair  appliances such as washers, dishwashers, dryers, refrigerators, microwaves, cooktops and ovens. We train hard to ensure that you and your appliances receive the service that you deserve. As a specialists in washer repair our technician will make sure to explain the problem before servicing your washer. We use only genuine appliance parts for your washer repair and have many of them on hand in our service vehicles. We appreciate your business and we are looking forward to work on your Washer.

Disclaimer: The Technical Reference Materials (hereinafter “Materials”) at this site are intended for viewing and use by qualified appliance service technicians. If you do not possess sufficient mechanical and electrical skills and the ability to comprehend, understand and follow all safety warnings and cautions on the product in these Materials, do not attempt to undertake the repairs that are depicted in these Materials. MD Appliance LLC disclaims any and all liability, to the fullest extent permitted by law, arising out of your use of the site and materials.

Washer Won’t Stop Filling

Washer won't stop filling with water, overflowing the tub and causing water leak and water damage.

  • Symptom: Washer won't stop filling with water and overflows the tub causing water leak.
  • Possible causes:
  1. Faulty water inlet valve.
  2. Faulty water level switch.
  3. Faulty water pressure hose.
  4. Faulty electronics.
Solution:
  1. Disconnect the power supply to the washer machine. If the washer continues to fill, replaced defective water inlet (solenoid) valve.
  2. Cancel the wash cycle. If the washer stops filling problem is most likely with water level sensor or pressure hose. The water level sensor is a pressure activated switch that is used to determine the correct water level in the tub. It is connected with washer outer tub with pressure hose. Make sure that the pressure hose is connected to the washer outer tub and the water level sensor. Check the pressure hose for tears, cracks or other damages. 
If problem persist you'll need to call professional servicer provider for help.
Washer Repair San Diego (619)339-5682  |  (858)208-3549   |   (949)432-0720
MD Appliance LLC offers  Washer Repair San Diego CA. We service and repair  appliances such as washers, dishwashers, dryers, refrigerators, microwaves, cooktops and ovens. We train hard to ensure that you and your appliances receive the service that you deserve. As a specialists in washer repair our technician will make sure to explain the problem before servicing your washer. We use only genuine appliance parts for your washer repair and have many of them on hand in our service vehicles. We appreciate your business and we are looking forward to work on your Washer.

Disclaimer: The Technical Reference Materials (hereinafter “Materials”) at this site are intended for viewing and use by qualified appliance service technicians. If you do not possess sufficient mechanical and electrical skills and the ability to comprehend, understand and follow all safety warnings and cautions on the product in these Materials, do not attempt to undertake the repairs that are depicted in these Materials. MD Appliance LLC disclaims any and all liability, to the fullest extent permitted by law, arising out of your use of the site and Materials.

Whirlpool Washer SUD Error

Whirlpool Washer SUD error code indicates that overdose of detergent is detected during the wash cycle . 

  • Symptom: The motor control unit senses a suds lock condition by analyzing the current draw on the drive motor. If “Sud” is displayed a potential suds lock is detected. 
  • Possible causes:
  1. Too much detergent is being used.
  2. Drain hose is plugged or kinked.
  3. Drain Pump filter is plugged.
  4. Drain pump, pressure switch or control board (CCU) malfunction.

Solution:

  1. If too much detergent was used, run the unit through a Rinse/Spin cycle then a Normal cycle without adding any detergent. This should clear the unit of the excess detergent.
  2. Check the drain hose and make sure it is not plugged or kinked.
  3. Check and clean drain pump filter of foreign objects and debris.
If problem persist you'll need to call professional servicer provider for help.

Whirlpool Appliance Repair San Diego (619)339-5682  |  (858)208-3549   |   (949)432-0720


MD Appliance LLC offers  Whirlpool washer Repair San Diego CA. We service and repair Whirlpool appliances such as washers, dishwashers, dryers, refrigerators, microwaves, cooktops and ovens. We train hard to ensure that you and your Whirlpool appliances receive the service that you deserve. As a specialists in Whirlpool washer repair our technician will make sure to explain the problem before servicing your appliance. We use only genuine Whirlpool parts for your appliances and have many of them on hand in our service vehicles. We appreciate your business and we are looking forward to work on your Whirlpool Appliance.

Disclaimer: The Technical Reference Materials (hereinafter “Materials”) at this site are intended for viewing and use by qualified appliance service technicians. If you do not possess sufficient mechanical and electrical skills and the ability to comprehend, understand and follow all safety warnings and cautions on the product in these Materials, do not attempt to undertake the repairs that are depicted in these Materials. MD Appliance LLC disclaims any and all liability, to the fullest extent permitted by law, arising out of your use of the site and Materials.

Whirlpool Washer F5E2 Error

Whirlpool Washer F5E2 error code indicates that there is the problem with washer lid lock. 

  • Symptom: The lid lock will not lock the lid and  F5E2 error code shows on the display.
  • Possible causes:
  1. Lid is not closed completely due to interference.
  2. Detergent buildup is preventing the lock bolt from extending.
  3. Main control detects open lid switch when attempting to lock.
  4. Main control cannot determine if lid lock is in a locked state.

Solution:Perform the following checks if the washer does not lock or unlock.

  1. Unplug the washer or disconnect power.
  2. Check for obstructions or residue buildup around the lid lock strike. Clear the buildup  and restart the cycle.
  3. If that doe not help, remove console to access main control.
  4. Visually check tha the J6 connector is inserted all the way into the main control. If connector is not inserted properly, reconnect J6.
If problem persist you'll need to call professional servicer provider for help.

Whirlpool Appliance Repair San Diego (619)339-5682  |  (858)208-3549   |   (949)432-0720


MD Appliance LLC offers  Whirlpool washer Repair San Diego CA. We service and repair Whirlpool appliances such as washers, dishwashers, dryers, refrigerators, microwaves, cooktops and ovens. We train hard to ensure that you and your Whirlpool appliances receive the service that you deserve. As a specialists in Whirlpool washer repair our technician will make sure to explain the problem before servicing your appliance. We use only genuine Whirlpool parts for your appliances and have many of them on hand in our service vehicles. We appreciate your business and we are looking forward to work on your Whirlpool Appliance.

Disclaimer: The Technical Reference Materials (hereinafter “Materials”) at this site are intended for viewing and use by qualified appliance service technicians. If you do not possess sufficient mechanical and electrical skills and the ability to comprehend, understand and follow all safety warnings and cautions on the product in these Materials, do not attempt to undertake the repairs that are depicted in these Materials. MD Appliance LLC disclaims any and all liability, to the fullest extent permitted by law, arising out of your use of the site and Materials.

LG Washer OE Error Code

 


LG Washer OE error code indicates that the washer is not draining or it's slowly draining the water out of the tub.

  • Symptom: excessive drain time, washer will not spin due to presence of water inside the tub. 
  • Possible causes: kinked drain hose, plugged drain hose, dirty or plugged drain pump filter and faulty drain pump.
  • Solution: Check behind the washer to ensure that the drain hose is not kinked or clogged. If any of the clogs have been removed, or the kinks in the drain hose have been straightened; run a spin cycle to confirm that the OE has been resolved. Clean the drain filter. Make sure to manually drain all the water from the tub before you attempt to clean the drain filter. Check the drain pump for proper operation.

LG Appliance Repair San Diego (619)339-5682  |  (858)208-3549   |   (949)432-0720


MD Appliance LLC offers  LG washer Repair San Diego CA. We service and repair LG appliances such as washers, dishwashers, dryers, refrigerators, microwaves, cooktops and ovens. We train hard to ensure that you and your LG appliances receive the service that you deserve. As a specialists in LG washer repair our technician will make sure to explain the problem before servicing your appliance. We use only genuine LG parts for your appliances and have many of them on hand in our service vehicles. We appreciate your business and we are looking forward to work on your LG Appliance.

Disclaimer: The Technical Reference Materials (hereinafter “Materials”) at this site are intended for viewing and use by qualified appliance service technicians. If you do not possess sufficient mechanical and electrical skills and the ability to comprehend, understand and follow all safety warnings and cautions on the product in these Materials, do not attempt to undertake the repairs that are depicted in these Materials. MD Appliance LLC disclaims any and all liability, to the fullest extent permitted by law, arising out of your use of the site and Materials.