Miele Cooktop Error FE31 indicates the problem with power supply. Check if the incoming power supply cable is connected to the unit properly. Follow the installation manual.

Error FE31

Symptom: The cooktop control switches off. A beep sounds for 3 seconds every 30 seconds, and an FE31 flashes in the display.
Possible causes:

Live (phase) conductor L 2 not available.
Neutral conductor N for right power electronic not available (bridge fault between terminals 4 and 5).
Electronic fault.

Solution:

Check the supply connection.
Check that the bridge is present between terminals 4 and 5 and has good contact.
Check the power electronic (side where FE is displayed) and replace it if necessary. Check the filter/control electronic (2N1) and replace it if necessary.

Miele Appliance Repair San Diego (619)339-5682 | (858)208-3549 | (949)432-0720

MD Appliance LLC offers Miele Cooktop Repair San Diego CA. We service and repair Miele appliances such as washers, dishwashers, dryers, refrigerators, microwaves, cooktops and ovens. We train hard to ensure that you and your Miele appliances receive the service that you deserve. As a specialists in Miele cooktop repair our technician will make sure to explain the problem before servicing your appliance. We use only genuine Miele parts for your appliances and have many of them on hand in our service vehicles. We appreciate your business and we are looking forward to work on your Miele Appliance.

APPOINTMENT

Disclaimer: The Technical Reference Materials (hereinafter “Materials”) at this site are intended for viewing and use by qualified appliance service technicians. If you do not possess sufficient mechanical and electrical skills and the ability to comprehend, understand and follow all safety warnings and cautions on the product in these Materials, do not attempt to undertake the repairs that are depicted in these Materials. MD Appliance LLC disclaims any and all liability, to the fullest extent permitted by law, arising out of your use of the site and Materials.

Miele Induction Cooktop Error F

Miele Induction Cooktop Error F indicates the problem that one or more keys are covered by dirt or the surrounding area light is too bright.

Error F

Symptom: The cooktop control switches off. A beep sounds for 3 seconds every 30 seconds, and an f flashes in the display of the burner. The signal ends after 10 minutes.
Possible causes: One or more touchpad have been touched for more than 12 seconds

Solution: Remove any object-soiling covering the controls.

Error F1

Symptom: After initial power hookup or during adjustment, fault code F 1 in upper power level displays.
Cause: Surrounding area is too bright.
Solution: Reduce the bright light conditions.

Error F2

Symptom: After initial power hookup or during adjustment, fault code F 2 in upper power level displays, indication a in both lower power level displays and number for affected sensor in timer display.
Cause: Strongly pulsing light (fluorescent lamp).
Solution: Reduce the pulsing light.

Error F3

Symptom: After initial power hookup or during adjustment, fault code F 3 in upper power level displays, indication a in both lower power level displays and number for affected sensor in timer display.
Cause: Sensor covered by a light-colored item.
Solution: Clear the control area.

Error F4

Symptom: After initial power hookup or during adjustment, fault code F 4 in upper power level displays, indication a in both lower power level displays and number for affected sensor in timer display.
Cause: Strongly fluctuating light conditions.
Solution: Reduce the light fluctuations in the proximity.

Miele Appliance Repair San Diego (619)339-5682 | (858)208-3549 | (949)432-0720

APPOINTMENT

Tag - Miele Cooktop Repair San Diego