The Miele Induction Cooktop F Error indicates that one or more keys on the touch panel might be blocked by dirt, debris, or residue. Additionally, bright surrounding light could disrupt the touch sensors, delaying their proper function. To resolve this issue and restore the cooktop’s responsiveness, clean the panel and minimize exposure to intense light. Below are common Miele Induction Cooktop F Error codes along with their solutions:

Error F

• Symptom: The cooktop control turns off. A beep sounds for 3 seconds every 30 seconds, and an “F” flashes on the burner display. The signal ends after 10 minutes.
• Possible causes: One or more touchpads have been touched for more than 12 seconds
• Solution: Remove any object-soiling covering the controls.

Error F1

• Symptom: After the initial power hookup or during adjustments, fault code F1 appears in the upper power level display.
• Cause: The surrounding area is too bright.
• Solution: Reduce the bright light conditions.

Error F2

• Symptom: After the initial power hookup or during adjustments, fault code F2 will be displayed in the upper power level. An indication in both lower power level displays will show the affected sensor with a number in the timer display.
• Cause: Strongly pulsing light (fluorescent lamp).
• Solution: Reduce the pulsing light.

Error F3

• Symptom: After the initial power hookup or during adjustment, fault code F3 is displayed in the upper power level display, indicating an issue in both lower power level displays and a number for the affected sensor in the timer display.
• Cause: Sensor covered by a light-colored item.
• Solution: Clear the control area.

Error F4

• Symptom: After the initial power hookup or during adjustments, fault code F4 appears in the upper power level display, indicating an issue in both lower power level displays and showing the number for the affected sensor in the timer display.
• Cause: Strongly fluctuating light conditions.
• Solution: Reduce the light fluctuations in the proximity.